After years of website traffic, the wood floors are shedding their luster. To rejuvenate them, fining sand as well as re-opening could be necessary. Right here’s ways to sand and also varnish a wood flooring.
Cut the film of paint between the plinth and the wall surface with a utility blade. Area a small board against the wall so as not to damage it. Remove the skirting board with a nail bar or screwdriver versus the board. Spread the plinth at the location of each nail. Number skirting boards as you remove them to assist in reinstallation. Get rid of the nails.
To sand a floor over its whole surface, use a drum sander. Begin making use of # 80 paper. Starting from completion of the workpiece, press the sander in the direction of the flooring battens to about 6 “from the wall. Increase the drum while keeping the sander moving. Go back to your beginning point and also start the next area halfway along the width of the very first area. When the surface has actually been totally fined sand, replace the # 80 paper with # 120. Repeat the process using # 150 paper to remove the marks left by the previous sanding. It is essential to operate in a well aerated area. If essential, you could rent out some equipment or work with experts. Or else, make sure to comply with the directions,
Make use of a boundary sander, and also the exact same sanding paper numbers in the order suggested in the previous action, to sand along the wall. Scuff hard-to-reach areas, such as radiators, with a paint scraper. At these same places, sand by hand.
Begin by applying the varnish on the edge of the space making use of a brush that is suitable for the item used. After that use an applicator recommended by the producer and spread the varnish over the remainder of the floor. Allow the time advised by sablage de plancher Laval .
To finish the work, sand the surface utilizing a ending up sander with a fine-grained rough pad.